|
|
|
Fender Apron Keeps Hull Clean
Print This Article
|
Email This Article
Many piers and docks are filthy, with oil, creosote and other sticky substances that your fenders rolling back and forth, can quickly transfer to your previously spotless hull.
To prevent the problem, and to protect the hull when I have to leave the boat unattended, I've made protective aprons out of the same Acrilan fabric I use for my Bimini top and on-deck gear covers. You can sew Acrilan on your home sewing machine, if you go slowly and don't force the stitching.
The upper grommeted corners are triple-thick for strength. The apron should be large enough so that the fender doesn't roll over the grommet and scratch the hull.
I've never had a problem with the apron riding up, but a sand-filled pocket at the bottom would ensure that the fabric stays in place.
Use a pair of light lines to tie the apron in place behind your fender, and you'll end most of your hull maintenance chores.
|
This article first appeared in the January 1, 1996 issue of Sea Magazine. All or parts of the information contained in this article might be outdated. |
|
|
|
|
